ACOUSTIC INSULATION PRODUCT RANGE
All floors and walls in New Build and Refurbishment developments must meet minimum sound insulation values in order to pass Part E Building Regulations.
Resonate’s range of high performance soundproofing products for floors and walls will enable you pass the required test. For more information on our range of solutions see below, for additional advice contact our technical experts to meet Part E regulations and prevent delayed project completion.
GYPDECK dry screed acoustic floor panels, provide a combination of excellent impact and airborne noise reduction, simple installation and reduction in build time benefits. The high density gypsum fibre panels are able to accept floor finishes including ceramic tiles directly making them an ideal soundproofing solution for any room and floor. Laid directly on the subdeck the GYPDECK panels have minimal impact on the floor height.
Gypdeck 28 is a high density, dry screed panel for acoustic flooring. Ideal for areas subjected to high levels of foot traffic and point loading.
Gypdeck WF is a high performance acoustic flooring solution. The panels incorporate a high compressive strength wood fibre resilient layer.
Gypdeck 18 is a complete underfloor heating and acoustic system. Ideal for residential properties, leisure complexes and care facilities.
Gypdeck Structural is a high-mass, load-bearing gypsum fibre floor panel. Designed for joist spanning, pedestal flooring systems, and acoustic cradle and batten systems.
RESODECK are a range of high performance chip board based acoustic floor panels ideal for refurbishment applications. The panels effectively reduce noise to improve living conditions and help meet part E regulations. Different resilient layer options are available to suit the intended application.
A low profile acoustic flooring solution. Suitable for use on all types of separating floors to help exceed compliance.
A high performance acoustic flooring solution. Ideal for residential properties that require reduction of foot fall noise.
A high strength acoustic floor solution ideal for areas with high foot traffic, white goods and heavy furniture.
Acoustic floor solution. Acts as a structural floor making it ideal for “direct to joist” installation in refurbishment applications.
RESOBOARD and RESOMAT are a range of high performance acoustic wall lining boards and acoustic underlay. Can be used in both new build and refurbishment developments.
A high performance acoustic wall lining board. Suitable for timber stud, brick and concrete block walls and are effective in new build and refurbishment developments.
A high performance acoustic wall lining board. The boards are suitable for timber stud, brick and concrete block walls and are effective in new build and refurbishment developments.
A heavy duty acoustic underlay which provides excellent sound reduction from foot fall noise and also helps to reduce airborne sounds from rooms above or below.
A heavy duty acoustic underlay which provides excellent sound reduction using 15mm thick easy to cut mats that have minimal impact on the floor build up. Ideal for rooms with minimal height.
A range of thin and robust resilient layers, primarily used in under screed applications to acoustically isolate the screed from the sub-floor and flanking walls.
A range of thin and robust surface bonded resilient layers. Ideal to be used below floor finishes such as engineered wood, ceramic tiles and luxury vinyl tiles.
A complete acoustic solution for under screed applications. The system isolates the screed from the sub-floor and significantly reduces the transmission of impact noise.
Soundproofing strips. Use in conjunction with acoustic floor and wall products to isolate the treatments from walls and skirting, reducing the risk of acoustic failure.
ResoTherm Chip DB is a grooved chipboard acoustic system. They are effective boards that help attenuate impact noise passing to floor below. Available with the option of bonded aluminium foiling facing and in 1200mm and 2400mm lengths and are bonded to a layer of 8mm.
ResoCradle is an ultra-high density recycled rubber floor levelling system. Designed for fast, accurate installation without wet trades. It supports various timber batten sizes, allowing adjustable floor heights for residential, commercial, and sports floors.
ResoSorb is a rubber resilient layer designed for impact noise isolation in floating screeds. Made from 100% recycled rubber, it features a unique dimpled wave texture that reduces surface contact, enhancing impact sound reduction through separating floors.
Here at Resonate Systems Ltd we are always investigating and creating innovative acoustic insulation solutions. We will soon have another new and exciting soundproofing application system to share with you so please pop back to our website soon!
VIEW OUR LATEST BROCHURE!
We’re excited to present our latest Acoustic Brochure ready for you to either download or browse online.
SPEAK TO OUR EXPERT TEAM
Avoid build time delays caused by failing essential soundproofing tests on your project. Don’t cut corners when it comes to providing occupants with optimum underfloor heating experiences. Speak to our friendly expert technical team today on 0116 464 7212
“Working with Resonate Systems has been excellent. Deliveries have consistently been on time, which has been crucial to meeting project milestones, and the ResoTherm XPS R300 boards have performed exceptionally well.”
Ben, Certus Construction
“Working with the resonate team has been very straightforward, Richard was very easy to deal with and very knowledgeable guiding us through the different products. The project team had good experience of installing the GYPDECK 28 due to it being easier to manoeuvre around site.”
Nathan, Easy Living
All product deliveries arrived on time and were well palletised. The installation process was straightforward, thanks to the comprehensive on-site training provided by Resonate Systems.
Stephen, Underfloor Heating Supply Ltd